Top Suction Series Range Hood
Top Suction Series Range Hood Advantages
1. Use without losing heat, making combustion more complete
The installation height of the top suction range hood is in line with national standards and will not interfere with the normal operation of the gas stove during use.
2. In line with the principle of air convection, the oil smoke is smoother
The hot smoke will only rise. In the process of air convection, the hot air will always rise. According to this principle, the range hood should be installed in the upper part of the gas stove to enable the hot gas and the soot to be discharged as soon as possible.
3. Double inlet, better absorption of soot
Under normal circumstances, the gas stove is two burners, then the range hood has two air inlets, which can correspond to the two burners of the gas stove to achieve better absorption of soot.
4. Double oil net, better separation of soot
The so-called soot separation is to separate the soot before the soot enters the interior of the range hood, and to discharge the separated smoke out of the room to ensure the indoor environment is clean; to isolate the oil from the outside of the range hood to protect the range hood Performance and longevity.
Maintenance
1. The installation height of the range hood must be appropriate, so as to ensure that the head is not met, and the effect of the range hood is ensured; the normal installation height is the best distance between the bottom of the hood and the top of the stove at 650-700 mm.
2. The outlet pipe should be shortened as much as possible, and the turning radius should be as large as possible, so that the wind can be smoothed, the smoking effect is good, and the noise is reduced.v 3. When installing in a public flue with a check valve, you must first check that the check valve is working properly.
Our company is one of the leading top suction series range hood manufacturers and suppliers in China since 1992. Feel free to wholesale bulk high quality top suction series range hood at competitive price here and get quotation from our factory.
Control Panel Exhaust Hood

Control Panel Exhaust Hood

Model: CXW-150/Stainless Steel T91
Illumination power: ≤2W
Motor power: 150W
Maximum air flow: 21±10%(m3/min)
Maximum wind...

Cabinet Kitchen Hood

Cabinet Kitchen Hood

Model: CXW-218-3A Stainless Steel D9
Air Flow: 24m3/min
Maximum Wind Pressure: 250pa
Motor Power: 218W
Full pressure efficiency:...

Small Kitchen Hood

Small Kitchen Hood

Model: CXW-218-3A Stainless Steel D12
Power supply: AC220V/50Hz
Illumination power: ≤1.5W×2
Motor power: 218W
Diameter of...

Modern Exhaust Hood

Modern Exhaust Hood

Model: CXW-218-3A Stainless Steel D11
Power Supply: AC220V/50Hz
Illumination power: ≤1.5W×2
Motor power: 218W
Diameter of...

Residential Exhaust Hood

Residential Exhaust Hood

Model: CXW-218-3A Stainless Steel D9
Air Flow: 24m3/min
Maximum Wind Pressure: 250pa
Motor Power: 218W
Full pressure efficiency:...

Stainless Steel Cooker Hood

Stainless Steel Cooker Hood

Model: CXW-150/Stainless Steel T91
Illumination power: ≤2W
Motor power: 150W
Maximum air flow: 21±10%(m3/min)
Maximum wind...

Residential Range Hood

Residential Range Hood

Model: CXW-150-T90
Power supply: AC220V/50Hz
Illumination power: ≤1.5W×2
Motor power: 153W

Island Range Hood

Island Range Hood

Model: CXW-218-3A-D8
Power supply: AC220V/50Hz
Illumination power: ≤1.5W×2
Motor power: 218W

Modern Range Hood

Modern Range Hood

Model: CXW-218-3A Stainless Steel D
Power supply: AC220V/50Hz
Illumination power: ≤3W
Motor power: 218W

Contemporary Range Hood

Contemporary Range Hood

Model: CXW-218-3A Stainless Steel D11
Power Supply: AC220V/50Hz
Illumination power: ≤1.5W×2
Motor power: 218W

Overhead Range Hood

Overhead Range Hood

Model: CXW-218-3A Stainless Steel D12
Power supply: AC220V/50Hz
Illumination power: ≤1.5W×2
Motor power: 218W