Big Suction Range Hood

Big Suction Range Hood

Model: CXW-218-CA01
Power supply: AC220V/50Hz
Illumination power: ≤1.5W×2
Motor power: 218W
Price: $80-179

Send InquiryChat Now
Product Details

Kitchen Range Hood


 PRODUCT SHOW                           



Model: CXW-218-CA01

Power supply: AC220V/50Hz

Illumination power: ≤1.5W×2

Motor power: 218W

Diameter of exhaust pip: 160mm

Maximum air flow: 20.5m³/min

Maximum wind pressure: 375pa

Noise level(SPL): 52dB

Net Weight: 27kg

Product Size: 900×460×1003mm


Combined with the advantages of domestic and foreign hoods, this product is designed according to modern kitchen environment and cooking characteristics. Based on aerodynamic principles, this range hood is the ideal kitchen home accessories to increase your quality of life.

With the advanced production line, full complement of testing equipment, our products are quality and reliable.

√. Modest and grand appearance,large wind capacity

√. Combine stainless steel with black tempered glass, staggered layer design, perfect technology

√. LED uses cold and gentle light, comfortable to eye and power saving.


COMPANY PROFILE                         



found in 1992, we are a global top gas appliance supplier and service customers 

all over the world!

    We try our best to send our top products to more places of the world.

    HIONE is a comprehensive high-end kitchen appliances manufacturers which 

includes independent research, production, sales and service capabilities. Moreover 

HIONE is one of the few export enterprises which has completely independent 

intellectual, property rights and its own kitchen appliance brand.

    Being familiar with different country's national conditions and public sentiment 

HIONE pays high attention to quality and always adhere to promote the creation 

of high quality, efficient, energy saving appliances to the consumers.


Show room                                    

1 (2).jpg

Packing and Weight:                     



Packing Dimension (Length*Width*Height) (mm)


Gross Weight (kg)


Net Weight (kg)


Container Loading (pcs)



Installation Precautions:

If you are refurbishing your kitchen, do not expose the range hood. Because the building materials, dust, paint and the gas they volatile would corrode the surface of the range hood to make it loss of luster. HIONE recommended that install the hood after you finished the renovation.

1. The earth wire of electrical socket should be reliable.

2. The environmental conditions of using this machine: temperature should be -15℃~ 40℃, relative humidity ≤90%(25℃), altitude ≤ 1000m. Please don't install this product in large air convection environment in case of effecting the smoke discharge.

3. The machine should be installed above the stove and to maintain the horizontal level. The minimum range of range hood cooking utensils to the stove should not less than 65cm.

4. The installation of rear exhaust pipe to the product should not be too long, no too much turning in case of effecting the smoke discharge.

5. Exhaust gas from the range hood is not allowed to be discharged into a hot flue which use to discharge combustion gases or other combustion fumes.

6. Make sure that the wall is strong enough to install the hood.

7. To ensure safety and smooth installation, please use the equipped accessories to install. Do not drill too much so that the expansion pipe and wall hole should be tightly matched which could avoid accidental fall.

8. To avoid fire incident, please exhaust the smoke to the outdoor.

9. During installation, please ensure the machine is installed above the stove and to maintain the horizontal level.

10. If you need to move the gas hobs before installing the range hood, please turn off the gas valve before moving the gas hobs.

11. Due to the installation of the range hood is more complex and heavier in weight, it is best installed by the professional staff  in accordance with the manual.

12. Range hoods may have very sharp edges. Please wear protective gloves when moving the hood for installation, cleaning or repair.




Q: Who are we?

A: HIONE is a reliable brand supporter, owing 26 years’ experience on designing, developing, 

and producing gas hob、range hood and gas boiler etc kitchen appliance.

Q: What can we do for you?

A: OEM service: order based on our existing models. ODM service: we can develop the product 

according to your idea.


Q: What’s our policy on warranty?

A: All of which will pass strict inspection before delivery. The warranty period of complete product is 

1 years, 1% damageable spare parts will be supplied along with container order. We can provide 

components for maintenance at any time.


Q: What is our MOQ?

A: For trial order, 50pcs/models is acceptable, For repeat order, 100pcs/model.


Q: What is our payment term?

A: T/T, 30% as deposit in advance, the balance before shipment; Irrevocable L/C at sight; 


Q: What is our delivery time?

A: 7~10 days for sample order; 30~35 days for regular order.

You can also contact us directly      

Contact:        Mr Ben Liang

Skype:           ben36997

Whatsapp:     +86 13411614521

Wechat:        13411614521

QQ:               570427198


Hot Tags: Big Suction Range Hood, China, suppliers, manufacturers, factory, price, bulk, quotation
Related Products