Bathroom Water Heater

Bathroom Water Heater

Model: JSQ20-H10T1
Air Exhaust: Forcibly Exhaust
Gas Type: LPG/NG/RG
Product Size: 560×345×145mm

Send Inquiry
Product Details

Bathroom Water Heater

Kitchen Gas Stove

标签.jpg



 PRODUCT SHOW                           

107.JSQ20-H10T1_副本.jpg

Specifications:                                

Model: JSQ20-H10T1

Air Exhaust: Forcibly Exhaust

Gas Type: LPG/NG/RG

Product Size: 560×345×145mm

            

Features:                                        

This series of products is ultra-thin and beautiful, easy to operate, and is clean fuel gas for fuel. It can provide comfortable hot water quickly and continuously. It is suitable for washing, washing and other washing.

1.Fully automatic water control: automatic ignition through water, automatic shutdown of water shutoff, arbitrary setting of hot water temperature, easy and convenient operation.

2.High-efficiency combustion system: burners, heat exchangers are innovative design, good combustion performance, high thermal efficiency.

3.Slow ignition design: ignition ignition rate high flame transmission.

4.The latest constant temperature technology using gas proportional valve precise control and dynamic monitoring of water flow sensing;

5.Intensified combustion technology: the use of advanced intensive combustion technology, the thickness of the whole machine is greatly reduced, eliminating the pressure caused by the installation of water heaters, improve the thermal efficiency, improve the combustion conditions.

6. Low water pressure start: If the water pressure is too low or the flow rate is too small, it can be started reliably, and can be used in high-rise residential buildings and low water pressure areas.

7. Temperature display and temperature setting function: It can accurately display the temperature, and the temperature setting range is 35C~65°C.

8. Forced air supply and exhaust device (balanced type): The flue gas is forcibly discharged to the outside, and the air required for combustion is forcibly sucked into the water heater from the outside to ensure that the indoor oxygen is not consumed and the air is not polluted.

9. Forced exhaust device (strong exhaust type): The flue gas is forcibly discharged to the outside, and the air required for combustion is forcibly sucked into the water heater to ensure that the indoor air is not polluted.

10. Shutdown cleaning function: After the water valve is turned off, the fan will still run for a period of time, speed up the reduction of the machine temperature and eliminate the exhaust gas.

11. Perfect safety protection measures

1) Flameout protection: equipped with a highly sensitive IC ion sensing device, which can cut off the gas source quickly and prevent gas leakage during accidental flameout.

2) Anti-dry protection: When the water heater is dry, the gas valve will automatically close immediately.

3) Anti-overheating safety device: If the inlet pressure is too low or the flow rate is too small, the hot water temperature is too high. At this time, the device operates and the water heater stops working.

4) Excessive wind pressure or flue blockage protection device: When the outdoor wind pressure is too large or the flue is blocked and the flue gas cannot be effectively discharged outside, the water heater will automatically stop working.

5) 20 minutes timed shutdown function: automatically shut down after 20 minutes of continuous use, remind you to pay attention to ventilation and ventilation, if you continue to use the closed water valve and then open.

6) High water pressure protection: When the water pressure is too high, the safety valve will automatically open and drain the pressure.

7) Anti-freeze protection: The outdoor temperature is ≤ 0 °C to discharge the residual water in the machine to avoid freezing the water heater.

8) Some models are equipped with automatic heating antifreeze device. When the temperature inside the machine is 2 °C-5C, heating starts, and the heating stops at 15C.

9) Prevent electric leakage and electric shock safety protection: When the machine accidentally leaks, the device can cut off the power supply within 0.1 seconds to ensure personal and machine safety.

 



COMPANY PROFILE                         


公司图片.jpg

    SHENZHEN HIONE GAS APPLIANCE CO, LTD("HIONE"in short below) is 

found in 1992, we are a global top gas appliance supplier and service customers 

all over the world!

    We try our best to send our top products to more places of the world.

    HIONE is a comprehensive high-end kitchen appliances manufacturers which 

includes independent research, production, sales and service capabilities. Moreover 

HIONE is one of the few export enterprises which has completely independent 

intellectual, property rights and its own kitchen appliance brand.

    Being familiar with different country's national conditions and public sentiment 

HIONE pays high attention to quality and always adhere to promote the creation 

of high quality, efficient, energy saving appliances to the consumers.


ok.jpg


Show room                                    

1 (2).jpg



Packing and Weight:                     


Model

JSQ20-H10T1

Packing Dimension (Length*Width*Height) (mm)

675x505x280mm

Gross Weight (kg)

12.5

Net Weight (kg)

9.5

Container Loading (pcs)


packaging.jpg



FAQ                                                     

 

Q: Who are we?

A: HIONE is a reliable brand supporter, owing 26 years’ experience on designing, developing, 

and producing gas hob、range hood and gas boiler etc kitchen appliance.


Q: What can we do for you?

A: OEM service: order based on our existing models. ODM service: we can develop the product 

according to your idea.

 

Q: What’s our policy on warranty?

A: All of which will pass strict inspection before delivery. The warranty period of complete product is 

1 years, 1% damageable spare parts will be supplied along with container order. We can provide 

components for maintenance at any time.

 

Q: What is our MOQ?

A: For trial order, 50pcs/models is acceptable, For repeat order, 100pcs/model.

 

Q: What is our payment term?

A: T/T, 30% as deposit in advance, the balance before shipment; Irrevocable L/C at sight; 

 

Q: What is our delivery time?

A: 7~10 days for sample order; 30~35 days for regular order.


You can also contact us directly      


Contact:        Mr Ben Liang

Skype:           ben36997

Whatsapp:     +86 13411614521

Wechat:        13411614521

QQ:               570427198

Mail:              sales1@huowang.com.cn


Hot Tags: bathroom water heater, China, suppliers, manufacturers, factory, price, bulk, quotation
Related Products
Inquiry